1kg/H-6kg/H Large Ozone Generator for Industrial Gas Disposal Odor Control

Basic Info

Frequency	50-60Hz
Installation	Portable
Type	High Pressure Discharge Type
Transport Package	Wooden Case
Trademark	Cape Golden
Origin	Beijing, China.
Production Capacity	200 Units Per Month

Product Description

Ozone is broadly used in the bottled water market due to its safety, simplicity and effectiveness. The ozonation process for bottled water involves a low concentration of ozone dissolved into the water, just before bottling, to disinfect the water, bottle, and cap. The process and system design are relatively straightforward. An integrated ozone injection system consists of an ozone generator, venturi injector, and recirculation pump. The in-process water enters a storage tank with a side loop, where ozone is injected into the water. The excess ozone off-gases from the water and exits through an ozone destruct at the top of the tank. The water then continues to the next step in the process, which differs depending on where the system is placed in the process. Ozone sensors can be used to monitor the ozone concentration at the injection point, the outlet of the storage tank, after the destruct unit, and at the point of use.
Large Ozone Generator 30-60kg/h

(kg/h) Ozone production	30	50	60
Air source type		Compressed air

(mg/L) Ozone concentration

25-35

(kw/h) Power consumption	480	800	960
(m/h) Cooling water flow	90	150	180

Dimensions (mm) 6200*4100*2600 7200*4800*2700 7200*5000*2800